Related products
TOYAMA HAMONO stainless hand pruners
Overview
Toyamahamono
The company was founded in the Edo period (1603-1868). As the head family of Echigo Wood Shears, Mr. Tatsumatsu I (named "Tatsumatsu"), Mr. Tomijiro II (named "Chinryu"), Mr. Hideyoshi III (named "Ryuzan"), and Mr. Hidehisa IV (named "Hidehisa") have passed down the tradition to generations in Sanjo, the city of hardware.
About this tool
Pruning shears to cut food beautifully
Pruning shears were originally gardening shears for use with plants, bonsai, and fresh flowers.
But we focused on the blade structure like a single-edged kitchen knife and the razor-sharpness of the forging process.
For hard foods
By attaching a small blade to the pruning shears, we have improved the bite of hard foods such as meat and fish bone cutters.
The sharpness of the cut and the beauty of the cross section, as if cut with a Japanese knife, are also features of these shears.
* Please note that it is difficult to cut soft foods such as meat stripes.
2 Key of Toyamahamono
Pruning shears improved for foodstuffs
Special blade attachment
A small blade attachment is used to cut without slipping by biting firmly into the bones and shells of the food.
The two-tiered blade also eliminates the tendency of this blade attachment to chip.
Food grade oil finish
Since the product has been changed from industrial use to food use, it is safe to use.
For delicate work
Small shears are flower picking shears, a tool for tending roses and flowers in the garden.
The blade is beveled and polished at the peak, and the blade is tailored to get into the crevices without damaging the plant!
Recommended for delicate tasks such as cutting into crab shells, cutting herbs and bushy vegetables and fruits.
Details
Specifications
- Size
- 526: Length 190mm / Blade length 60mm
513: Length 200mm / Blade length 70mm - Weight
- 526: 200g
513: 255g - Maximum cutting capacity
- Diameter approx. 10 mm, cutting edge approx. 5 mm
- Material
- Forged stainless steel
- Origin
- Niigata, Japan
Precautions
- Please note that plastic string, wire, plastic bags, cloth, paper, etc. cannot be cut.
- Do not cut ice or frozen foods as this may cause "chipping."
- When using new shears, do not cut thick bones at first, but start with soft, thin bones and let the blade get used to them.
- Before use, make sure that there is nothing wrong with the blade and that the bolts and nuts are not loose to ensure safety.
- The product is delivered with lubricant pointed to the bolt and nut portion.
- Rust may occur if moisture or dirt remains on the surface.
- The blade is extremely sharp. Please be careful not to injure yourself by tracing the blade with your bare hands when handling it.
- Please do not remove the bolts when cleaning, etc.
- Bone cutting should be up to 10 mm. (Small shears up to 5 mm)
- The back side of the blade is finely tuned and delicate. Please do not touch it for cleaning, etc.
- Dishwasher safe.
Storage location
- Keep out of reach of young children.
- Keep the product in a room with low humidity.
If the blade is chipped
- Continued use of a chipped blade may cause the chipping to become even more severe and may not be repairable. Discontinue use when chipping is detected.
- There is a charge for blade sharpening, repairs, and inquiries about the product.Please contact us via our contact form.
Download
Proper way to hold shears
- The index finger is not placed in the ring, but is placed in front of the ring.
This will stabilize the shears and make it easier to do detailed work. - Hold the bolt caulking down where the blades cross, with the one that turns with the blade up.
Care Instructions
- After use, wipe off any dirt on the body (especially on the blade) and store it carefully.
- Lubricate stopper parts, bolt nuts and caulking parts regularly.
- After use, rinse and dry gently with a dry cloth. To prevent rusting, dry the shears in the open position and do not allow water to collect in the joints.
- Please refrain from disassembling the product yourself, as a special tool is required to open and close the screws.
- Please apply lubricant (such as camellia oil) to stopper parts, bolt nuts and caulking parts on a regular basis.
FAQ
Yes, you can order items not listed online. Please feel free to contact us using the inquiry form.
Yes, we offer a fee-based gift wrapping at JPY660 per set (tax included). To request a gift wrapping, please contact us using the inquiry form.
Yes, but for online orders, we offer a free engraving service for knives only. Please select the desired engraving option, enter text and add the knife to cart. Engraving for products other than knives is only available at our physical store at Kappabashi, Tokyo.
Please feel free to contact us using the inquiry form. We are happy to make a quotation for your order. It would be helpful if you could first tell us the delivery address and the desired due date so that we can proceed smoothly.
CATEGORY
online stores
Delivery preferences
*Date of delivery can be requested for ONLY domestic shipment. *If you wish to have your knife inscribed, you cannot specify a delivery date and time. We will ship 1 week to 10 days after the order date.